Edukad projektid

eesti keeles / in English

Sensor-Base Ultrasonic Viscosity Control for the Extrusion of Recycled Plastics

akronüüm: ULTRAVISC
algus: 2009-10-01
lõpp: 2011-09-30
 
programm: FP7 - Euroopa Liidu 7. raamprogramm
alaprogramm: SME - Väikese ja keskmise suurusega ettevõtetele suuantud teadustegevused (VKEd)
instrument: BSG-SME - Teadustöö VKE huvides
projektikonkurss: FP7-SME-2008-1
projekti number: 232176
kestus kuudes: 24
partnerite arv: 8
 
lühikokkuvõte: Our aim is to improve processes for the recycling of post-consumer plastic waste, using new technology to compensate for impurities and variations in the physical properties of recycled feedstock. Ultravisc will allow the production of higher grade products from recycled materials, and will reduce costs for plastics recyclers and processors, thus increasing European competitiveness. It will also provide significant environmental benefits, through conservation of non-renewable raw materials, processing energy, and CO2 emissions, and a reduction in landfill use. The lack of highly efficient separation processes for consumer plastics results in materials that are contaminated and inconsistent regarding physical properties. This results in two distinct problems in the processing of these materials by extrusion methods. The first is the presence of small particulate contaminants, which can give rise to serious defects and the generation of scrap product. The second is batch-to-batch variability in the bulk melt flow index, due to differences in the source of the waste materials used. This demands re-optimisation of machine operating parameters, resulting in line downtime and materials wastage. Our process will be based on novel ‘Soft Sensor’ technology, which will monitor the viscosity of the polymer melt during processing and control the selective application of ultrasound to ensure consistent processing, using an intelligent fully closed-loop system. We will also develop an ultrasonically assisted filter pack capable of filtering fine particulate contaminants with a low back pressure, improving filtration of plastics. These innovations will enable consistent processing of variable grade recycled plastic materials.
partneri jrk nr ja roll partneri nimi riik kontaktisik koduleht
1 koordinaator Cherry Drainage Pipes Limited UK Stefan Cherry http://www.cherrypipes.com
2 partner DKI Plast A.S DK Jens Hansen http://www.dkiplast.dk
3 partner Plastitehase AS EE Kalevi Paluteder http://www.plastitehas.ee
4 partner POLINTER SA ES Ricard Ramos http://www.polinter.com
5 partner Total Sigma Measurements Ltd IE Suzanne Flynn http://www.tsmcontrols.com
6 partner THE UK MATERIALS TECHNOLOGY RESEARCH INSTITUTE LIMITED UK Andy Dean http://www.uk-matri.org
7 partner SIRRIS HET COLLECTIEF CENTRUM VAN DE TECHNOLOGISCHE INDUSTRIE VZW BE Jacques Lecomte http://www.sirris.be
8 partner QUEEN'S UNIVERSITY BELFAST UK Pauline Mccann http://www.qub.ac.uk